To arrange a booking in the workshop please contact ‘Doc’ using tel No 0 7551 6551 41 from 9am to 5pm Monday-Friday
The FJ Owners Club has been running over 27 years now and the last 24 years it has been my full time job.
My back ground stems from an Aircraft Technical on fast jets in the RAF so it was an easy and natural progression to open up a FJ Club workshop (formally known as Fudge m/c) to work on the much more simple, FJ1100 and 1200.
The Clubs workshop has built up an excellent name and now boasts 5 star accreditation with the Good Dealer scheme (see gooddealerscheme.co.uk) with its massive knowledge on this one make and its bonus of cheap parts and labour charges. This means that it can be very busy in the spring and summer months, normally with up to a three week waiting list.
Many members forget that if a major service is due annually, then its not important if the job was done February or August, your linkages will still be greased, your shims will still not have gone out of adjustment etc. I have always serviced my bike at the end of a year; this allows me to have a busy spring/summer riding the bike instead of ervicing or repairing it.
Prices both parts and labour are a fraction of your local tyre kicking dealer and their normal £250 charge for an oil and filter change!
The FJ Specialist
FJ Servicing Charges Labour Only
Prices stated do not include parts.
BASIC SERVICE: every 4,000 miles or 12 months:
Work carried out: Oil & Filter, Check: bearings, pads, chain, lights, tyres, levels
Labour (inc) COST: £50
MAJOR SERVICE: every 8,000 miles or 12 months:
Work carried out: Oil & Filters, valve clearance, carbs balancing, fork oil, ABS check, Check: bearings,
pads, chain, lights, tyres, levels, battery etc.
Labour (inc) COST: £120.00
ENGINE SERVICE: every 8,000 miles or 12 months:
Work carried out: Valve clearance adjusted and carbs balanced.
Labour (inc) COST: £90
LINKAGE SERVICE: every 12,000 miles or 24 months:
Work carried out: Remove and greased: Swingarm, Shock, Linkage assembly and Steering Stem bearings
Labour (inc) COST: £120
Extra Labour Charges
Fork Seals replacement £90.00
Stem bearing replacement £90.00
Tyre fit and Balance £20.00 ea
Brake pads replacement £20.00
Chain & Sprocket fitment £45.00
Progressive spring fitment £25.00
Scottoiler fitment £35.00
HCR Scottoiler fitment £50.00
Carb balancing £30.00
Exhaust collector box fitment £80.00
Exhaust system replacement £90.00
Braided hose fitment £20 per line
Carbs cleaned & balanced £99.00
Brake Discs fitment £25 each
Replace rear shock £35.00
Laser wheel alignment £18.00
Cylinder head gasket replaced £240.00
Decoke head, fit new valve seals and lap valves £440.00
Recondition ABS hyd pump £145 (removal and fitment extra £35)
Extra work outside this menu £45 per hour
All charges are for labour (inc) and exclude Parts
PLEASE RING 0 7551 6551 41 TO BOOK WORKSHOP (please dont email)
Directions to New workshop;
From South; M5 Junction 14, slip road turn Right
From North; M5 Junction 14, slip road turn Left
Travel to end of road until 'Roundabout (do not turn off before )
At roundabout turn Right and follow road for approx 6 miles to end of road until you reach traffic lights.
Turn Left and travel until next Roundabout.
Take 3rd Exit until you reach traffic lights and turn right at lights.
At next Roundabout take 2nd Exit.
Take next Left turn into Nibley lane.
FJ owners club new workshop is 50 yds up road on R/H side in Nibley Business Park. Unit 5.
Park at front 2 x car parking spaces available and use front door to announce your arrival.